Connect to Fusion

!Your device will need to be on the same network as the Fusion Data Server and Fusion Collect will need to have been enable by a CRB Cunninghams representative.

To connect Fusion Collect to Fusion:

1. Open Fusion Back Office and navigate to the ‘System settings’ screen.
2. Click on the Connect Fusion Collect tile.
   
3. The Connect Fusion Collect QR code will be displayed.

*This QR code can also be printed using the Print button.

4. Within the Fusion Collect configuration screen, press the Scan QR Code button.
   

*Your device will likely ask for your permission to allow Fusion Collect access to the device camera. You will need to allow this to scan the QR code.

5. Line the QR code up on the screen and the app will read the QR and set the address to that of the Fusion Data Server.
   

*If your device does not have a functioning camera, you can manually set the address by tapping on the address and using the device keyboard, set the address to the one shown below the QR code.

6. Once scanned, you will be returned to the config screen. You can continue to Sign in by pressing the Sign in button.